H2 Riku Knuckles

08/18/2014 at 4:02 pm

I’ve had my M’s knuckles for a few weeks now but I decided to switch over to TN Racing’s H2 Riku knuckles. They’re a bit pricey, but the knuckles come with stuff such as KPI and trail set to Riku’s specifications so I was curious to see how they feel.

Riku Knuckles

M’s High Spec v2 Knuckles

08/13/2014 at 11:49 am

Since the DIB v2 comes with C type suspension out of the box I decided to try out some low scrub knuckles. With a lower scrub radius, your wheel won’t sink into the fenders so it makes it look like you’re holding more counter. These knuckles also let you set the trail and kingpin angle as well. The trail helps the front wheels roll and trace the ground more, and is one of the most important features of this knuckle in my opinions as well.

Instructions

Toe Zero + H2 Riku Rear Hub

08/11/2014 at 4:53 pm

Finally got stuff ready to get my rear toe to 0.  You’ll need DRB-31RR and DRB-31RF. Possibly shorter dogbones as well, since the toe blocks are a little bit more narrow compared to the stock 3.5. I went with Square’s 40mm, and changed out my rear hubs as well.

Toe 0